Yamaha S-03SL Owner's Manual page 64

13-1. PEGIntL (PEG Initial Level)
13-2. PEGAtkTm (PEG Attack Time)
13-3. PEGRelL (PEG Release Level)
13-4. PEGRelTm (PEG Release Time)
You can set PEG (Pitch Envelope Generator)
Parameters for each Part. There are four parameters
that control how the pitch changes from the moment a
note is pressed on the keyboard to the moment it is
released or the point at which the level has faded to
zero.
PEGInitL
+00
PAGE PART ELEM KEY
13 1
OCTAVE
PEGRelL
+00
PAGE PART ELEM KEY
13 1
OCTAVE
Normal Pitch
PEG Initial Level
PEG
Attack
Time
Key on
❏ Settings: –64 ~ +63
■ PEGIntL
Determines the initial pitch, or the pitch that sounds
the moment the key is played.
■ PEGAtkTm
Determines the time it takes after you play the key
for the pitch to return to normal (or original), from
the pitch set in PEG Initial Level above.
■ PEGRelL
Determines the final pitch that is reached after you
release your finger from the key.
■ PEGRelTm
Determines the time it takes for the pitch to reach
the setting made in PEG Release Level above, from
when you release your finger from the key.
64
Part Tone
PEGAtkTm
+00
PAGE PART ELEM KEY
13 1
OCTAVE
PEGRelTm
+00
PAGE PART ELEM KEY
13
1
OCTAVE
Time
PEG Release Level
PEG
Release
Time
Key off
14-1. Vib Rate (Vibrato Rate)
14-2. Vib Depth (Vibrato Depth)
14-3. Vib Delay (Vibrato Delay)
Vib Rate
+00
PAGE PART ELEM KEY
14 1
OCTAVE
Vib Delay
+00
PAGE PART ELEM KEY
14
OCTAVE
Delay Rate
Key on
❏ Settings: –64 ~ +63
■ Vib Rate
Determines the speed of pitch modulation.
■ Vib Depth
Determines the depth or degree of pitch modulation.
n This Parameter is not available for Drum Parts.
■ Vib Delay
Determines the amount of time that elapses from
when a key is played to when the Vibrato effect
starts. The higher the value, the longer the delay
before the onset of the Vibrato effect.
n The Parameter is not available for Drum Parts.
Vib Depth
+00
PAGE PART ELEM KEY
14 1
OCTAVE
Time
Depth