Yamaha S-03SL Owner's Manual page 60

●
USER
❏ Settings: US001~US128, USDR01~USDR02
Synth St
PAGE PART ELEM KEY
1
OCTAVE
●
GM/XG
GrandPno
PAGE PART ELEM KEY
1
OCTAVE
Use the [E] and [F] buttons to switch among the
different banks for selecting program numbers.
❏ Settings:
Bank Select: BK*** (Refer to the XG Voice List and
XG Drum List in the separate Data List.
Program Number: XG001~XG128 (The actual number of
available programs differs depedning on
the selected bank. For details, refer to
the XG Voice List and XG Drum List in
the separate Data List.)
2. Volume
Set the output level of the Part.
Volume
PAGE PART ELEM KEY
1
2
OCTAVE
❏ Settings: 0~127
60
Voice Selection/Part Mix
US001
XG001
100
3. Pan
Set the stereo pan position of the Part.
Pan
PAGE PART ELEM KEY
3 1
OCTAVE
❏ Settings: Rnd (random; the pan position moves randomly
each time a key is played), L63 (Left) ~ C (Center)
~ R63 (Right)
n You can also enter the settings below using the numeric
keypad.
0: Rnd
1~63: L63~L01
64: C (Center)
65~127: R01~R63
4-1. NtLmt-L (Note Limit Low)
4-2. NtLmt-H (Note Limit High)
Set the lowest and highest notes of the keyboard range
for each Part. Each Part will only sound for notes
played within its specified range.
NtLmt-L
C-2
PAGE PART ELEM KEY
4 1
OCTAVE
❏ Settings: C-2 ~ G8
n You can set the lowest and highest notes in the range by
pressing notes on the keyboard while holding down the
[ENTER] button.
n For more information and some example settings, see
page 41.
5-1. VelLmt-L (Velocity Limit Low)
5-2. VelLmt-H (Velocity Limit High)
Set the minimum and maximum values of the velocity
range within which each Part will respond. Each Part
will only sound for notes played within its specified
velocity range.
VelLmt-L
001
PAGE PART ELEM KEY
5 1
OCTAVE
❏ Settings: 1~127
C
NtLmt-H
G8
PAGE PART ELEM KEY
4 1
OCTAVE
VelLmt-H
127
PAGE PART ELEM KEY
5 1
OCTAVE