Siemens SIMATIC NET RUGGEDCOM RST2228P Equipment Manual page 59

Device management
4.4 Inserting/removing the CLP
Mechanical/electrical hazard – risk of damage to the CLP
•
•
•
Operating hazard – risk of data loss
Only insert or remove the CLP when the device is de-energized.
Security hazard – risk of unauthorized access and/or exploitation
Make sure to remove the CLP before decommissioning the device or sending the
device to a third-party.
Contamination hazard – risk of dust and dirt entering the CLP slot
When the CLP is not installed, make sure the protective cover is installed in its place.
Removing the CLP
To remove the CLP, do the following:
Configuration hazard – risk of data loss
After uploading or downloading a file, allow at least twenty seconds before
removing the CLP to ensure the data has been fully transferred.
1.
50
NOTICE
Do not expose the CLP to extreme temperatures or humidity
Do not expose the CLP to large magnetic or static electric fields
Do not bend or drop the CLP
NOTICE
NOTICE
NOTICE
NOTICE
Power down the device.
RUGGEDCOM RST2228P
Equipment Manual, 10/2023, C79000-G8976-1403-17