Emv Filter (-Rf01) - Siemens SICHARGE UC Panto Kit Repair Instructions

Control box repair cases

6.9 EMV Filter (-RF01)

6.9 EMV Filter (-RF01)
Location of the devices
Figure 6-13
Device tag Part number
-RF01 L2D0097630
Instructions
1. Label the cable(s) with the connected contact(s) or take a photo if sufficient.
2. Disconnect the cable(s) from the EMV Filter.
3. Unscrew and remove the old EMV Filter.
4. Install the new EMV Filter.
5. Reconnect the cable(s) as before, according to the picture or label.
6. Restart the system and test the exchanged device.
28
Location of -RF01 in the control box
Quantity Designation
1 EMV Filter AC 1P+N 16A
SICHARGE UC Panto Kit Repair Instructions
Service Manual, 04/2024, A5E53652973-AA