Pcb - Linux Board (-Ke02) - Siemens SICHARGE UC Panto Kit Repair Instructions

Control box repair cases

6.3 PCB - Linux Board (-KE02)

Instructions
1. Label the cable(s) with the connected contact(s) or take a photo if sufficient.
2. Disconnect the cable(s) from the device.
3. Remove the device from the DIN rail.
4. Replace it with a new device and insert the new one on the DIN rail.
5. Reconnect the cable(s) to the same terminals as before, according to the picture or label.
6. Restart the system and test the exchanged device.
6.3 PCB - Linux Board (-KE02)
Use an antistatic wrist strap otherwise you risk damaging the PCB.
Location of the devices
The Linux Board is located on the HMI.
Figure 6-3
Device tag Part number
-KE02 L2D0096590
16
WARNING
Location of -KF02 in the control box
Quantity Designation
1 PCB - Linux Board V2
SICHARGE UC Panto Kit Repair Instructions
Service Manual, 04/2024, A5E53652973-AA