Advertisement
2. USING YOUR CAMCORDER
Quick Use Instructions
Simply insert the memory card into the card slot, and insert the auxiliary power adaptor into
the camcorder's USB port and your car's power port. The camcorder will automatically
power on and begin recording a video file.
To start or stop recording at any time, press the OK/RECORD button. You may also
remove the auxiliary DC power adaptor at any time to automatically save a recording and
power the camcorder off. Just mount it to your windshield, plug in the power and drive!
3. CAMCORDER OPERATION
Once you have inserted the MicroSD memory card and plugged your camcorder into a
power source, your camcorder will automatically power on and begin recording. Press the
OK/RECORD button to stop recording. You may also manually power your camcorder on
or off by pressing the POWER button for 3 seconds.
There are 3 operation modes available for use. To cycle through the different modes,
simply press the MODE button. Your camcorder's screen will show the current mode in the
display's upper left corner. Modes cannot change while a video is being recorded. The
recording must stop first before changing to another mode.
3.1 Video Capture Mode
Once your camcorder powers on, it will default to Video Mode and will begin recording
automatically. To start or stop recording at any time, press the OK/RECORD button. Press
the RIGHT button to change the view of the rear camera.
3.2 Photo Capture Mode
To capture a photo, enter PHOTO Mode by pressing the MODE button until a camera icon
is show in the upper left corner of the screen. Press the OK/RECORD button to instantly
capture a photo.
3.3 Playback Mode
To review your video and photo files, enter PLAYBACK Mode. Press the MODE button
until a previously captured file is shown on the screen. The most recent file captured will be
displayed first.
8
Advertisement
