Advertisement
4.3.9 Restore Default Settings
This setting allows you to reset all menu settings to the factory default settings. This
function will not delete any media stored on your memory card.
1. In VIDEO or PHOTO modes, press and hold the MODE button to access the settings
menu. Then press the MODE button again to access the Setup mode settings.
2. Select 'Restore Default Settings' by using the LEFT or RIGHT buttons. Press the
OK/RECORD button to enter the 'Restore Default Settings' submenu.
3. Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting.
You can select from Cancel and OK.
4. Press the OK/RECORD button to confirm your selected setting.
5. Press the MODE button to exit the submenu without making a selection.
4.3.10 Version
This setting displays the current firmware version of your camcorder.
1. In VIDEO or PHOTO modes, press and hold the MODE button to access the settings
menu. Then press the MODE button again to access the Setup mode settings.
2. Select 'Version' by using the LEFT or RIGHT buttons. Press the OK/RECORD button to
show the current firmware version.
3. Press the OK/RECORD button to exit the Firmware Version.
4. Press the MODE button to exit the submenu.
21
Advertisement
