Advertisement
1. In VIDEO or PHOTO modes, press and hold the MODE button to access the settings
menu. Then press the MODE button again to access the Setup mode settings.
2. Select 'Frequency' by using the LEFT or RIGHT buttons. Press the OK/RECORD button
to enter the ''Frequency' submenu.
3. Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting.
You can select from 50Hz and 60Hz.
60Hz
.
4. Press the OK/RECORD button to confirm your selected setting.
5. Press the MODE button to exit the submenu without making a selection.
4.3.4 Beep Sound
This setting allows you to enable or disable the sound when pressing a button.
1. In VIDEO or PHOTO modes, press and hold the MODE button to access the settings
menu. Then press the MODE button again to access the Setup mode settings.
2. Select 'Beep Sound' by using the LEFT or RIGHT buttons. Press the OK/RECORD
button to enter the 'Beep Sound' submenu.
3. Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting.
You can select from Off and On.
4. Press the OK/RECORD button to confirm your selected setting
5. Press the MODE button to exit the submenu without making a selection.
4.3.5 Language
This setting allows you to set the language for your camcorder's menus.
1. In VIDEO or PHOTO modes, press and hold the MODE button to access the settings
menu. Then press the MODE button again to access the Setup mode settings.
2. Select 'Language' by using the LEFT or RIGHT buttons. Press the OK/RECORD button
to enter the 'Language' submenu.
3. Press the LEFT or RIGHT buttons to navigate the submenu and select a language. You
can select from several different languages.
4. Press the OK/RECORD button to confirm your selected language.
5. Press the MODE button to exit the submenu without making a selection.
4.3.6 Date/Time
This setting allows you to set a date and time for display on videos and photos.
1. In VIDEO or PHOTO modes, press and hold the MODE button to access the settings
menu. Then press the MODE button again to access the Setup mode settings.
2. Press the OK/RECORD button to enter the 'Date/Time' submenu.
3. The menu is presented as follows:
Date: YYYY / MM / DD
The default frequency for the United States is
19
Advertisement
