Advertisement
3. Using Your Camcorder
3.4.7 Restore Default Settings
Factory default settings can be restored in this menu. This function will
not delete the media stored on the memory card, and will only restore all
of the menu's setting back to factory default settings.
1. In Setup Mode use the UP or DOWN buttons to select 'Restore Default
Settings' and press the RECORD/OK button to enter the 'Restore Default
Settings' submenu.
2. Press the UP or DOWN buttons to navigate the menu and press the
RECORD/OK button to confirm your selection (Yes, No).
3. Press the MENU button to exit the menu without making a selection.
3.4.8 Touch Screen Calibration
The LCD touch screen can be calibrated by following these steps.
1. In Setup Mode use the UP or DOWN buttons to select 'Touch Screen
Calibration' and press the RECORD/OK button to start calibrating the
screen.
2. There will be a small plus sign that then shows in the bottom left corner of
the screen, try to touch the plus sign as close to center as possible.
3. After touching that plus sign you will be prompted to touch 4 more plus
signs, one in each of the remaining three corners and one in the center of
the screen.
4. After touching the last plus sign, the calibration will be complete.
5. You can perform the touch screen calibration as many times as needed.
Alternatively, your camcorder's menus can be navigated
via the touch screen.
27
Advertisement
