Yamaha PortaSound PSS-795 Owner's Manual page 30

SONG MEMORY BTRAC
K
ооо о
MEASURE
f Т (
wë шн MELOOY MELODY MELODY VECTOR AUTO
AEE |
C365 ooaoooaan
RECORD 5
Press the TRACK Select
button of your choice.
Press and Hold
RECORD button.
If you want to cancel, press the chosen TRACK Select
button again.
Before you start Recording, make sure the settings and
assignments for Tempo, Voice numbers, etc., are all
currently the ones you want.
Step 4: Start Recording.
You can start Recording in the currently selected Tempo by
pressing any key of the keyboard, or pressing the PLAY
button.
RESET REWIND STOP PLAY FAST FOWARD
or
cac»
%
During Recording, the SONG#/MEASURE display shows
the Bar number you are in. The 3 dots in the SONG#/
MEASURE display and the 3 dots in the MULTI DISPLAY
will show the beats of the measure in tempo, same as when
in the Rhythm playing. In addition, from the speakers a
metronome sound will play out with an accent on the first
beat of each bar, and the LED of the Selected Track you
are Recording on will continue to flash, but metronome
sounds will not play out when recording on the AUTO
ACCOMP. Track because you can play to Rhythm patterns
running at that time. (Also when in Playback the
metronome is not played out.)
MULT! DISPLAY SONG#/MEASURE
acd age
AUTO ACCOMP. BEAT
Displays the Beat. Displays the Beat
and the Bar
Number.
28
Step 5: Stop Recording.
You can stop Recording by pressing the STOP button of
the SONG MEMORY. When you're Recording on the
AUTO ACCOMP. Track, you can finish the Recording with
an Ending pattern by pressing the SYNCHRO START/
ENDING button of ACCOMPANIMENT CONTROL. After
Stopping the Recording, the SONG#/MEASURE display will
automatically indicates the Bar number you started
Recording from. Also, the LED of the Track just Recorded
on, will stop flashing but remains lit up.
»» Verification of Recording:
When you press the PLAY button, you can Playback what
you have Recorded. You can stop Playback at any time by
pressing the STOP button. Also, you can go forward or
backward using the FAST FORWARD or REWIND buttons,
regardless of the status of the Song (running/stop). If you
want to return to the Beginning of the Song, just press the
RESET button (for further details see page 29 "e. How to
Playback a Song".)
RESET REWIND STOP PLAY FAST FOWARD
»» Continued Recording on Remaining Tracks
(Multi-Track Recording):
If you want to Playback and hear the Tracks already
Recorded while Recording on a New Track, the LED of the
Track for Playback should be lit. Repeat Steps ? thru 5 to
Record on the remaining Tracks.
* If you don't want to hear a Track previously Recorded, turn OFF that
Track's LED by pressing the corresponding Track Select button. You
can Playback any Tracks previously Recorded at any time, by pressing
the corresponding Track Select buttons which will light up (turn ON) or
turn off the LEDs, regardless of the status of the Song (running/stop).
When you try a Multi-Track Recording, take care of the fin,
length of the Song you wish to record. So remember the `.
following:
In case the First Recorded Track is not the
AUTO ACCOMP. Track:
t#Any longest Track (in regard of Bar numbers) will
determine the Final length of the Song.
In case the First Recorded Track is the AUTO
ACCOMP. Track:
s The AUTO ACCOMP. Track will determine the final
length of the Song. Any other Track cannot be Recorded
longer than the AUTO ACCOMP. Track. If you wish to
Record much longer than the current length, Re-record on
the AUTO ACCOMP. Track as long as you wish.
In case you wish to shorten the final length of
the Song:
«Select the next Bar ahead to the Bar which you
determine as the Last Bar. Then press the CLEAR and
STOP button in the Song Memory simultaneously.
Remember you cannot change the final length of the Song
even pressing the CLEAR and Track Select buttons
simultaneously.