Yamaha PortaSound PSS-795 Owner's Manual page 22

a. Fingering of Auto Accompaniment
thru F#2.
—e Fingering Selection >
FINGER GERED
C1 thru F#2.
When the Fingering is NOT selected, (Normal keyboard: С thru Ce)
FINGERING
о
SINGLE FIN-
о
FINGER D
b. 3 Orchestrations
Another important function to consider when you're using
Auto Accompaniment is Orchestration. There are 3 buttons
which are: INTRO, LARGE, and BRIDGE located in the
Orchestration select. Depending on how you assign these
Orchestrations in combining one another, you can produce
many styles of arrangements.
»» INTRO button:
When you press the INTRO button, the LED will light up,
and you are set up for Intro. (Same as in Rhythm Style
Section). Now, after selecting either SINGLE FINGER or
FINGERED mode to start the Auto Accompaniment, it will
play an Intro. controlled by the chords you play with your
left hand, and in the Style which is currently selected.
»» LARGE button:
This button controls whether the Auto Acommpaniment will
be played with a Small ensemble or a Large ensemble (of
Instrumentation). When you press the Large button and the
LED lights up, you will have the Large ensemble Effect, and
when the LED is not lit up, you have the Small ensemble
Effect.
20
Auto Accompaniment Key Section
(C1 thru Fei
c3c3c93cacÓ i-r
* When the Fingering is not selected, you will be able to play on the whole keyboard in any Voice you select.
>> BRIDGE button:
When you press the BRIDGE button, the LED will light up
and you will be in the BRIDGE pattern set-up (same as in
the Rhythm Style Section) when the LED is not lit up it will
be in NORMAL pattern set-up. The Auto Accompaniment
will play in either case assigned, the arranging which fits to
each Pattern. Also, depending on the status of the Large/
Small ensemble selected using the LARGE button, the
f
arranging will vary accordingly.
You can play with various patterns combining these 3
Orchestration's activation and in activation. =
* INTRO inactivation simply means Starting the Rhythm without Intro..
This has no concern with LARGE active or inactive.
* You can assign the Orchestration buttons at any time. The initial pre-
set settings are: INTRO/Off, LARGE/On, BRIDGE/Off (NORMAL).