Camec COMPACT RV II User Manual page 8

2-Installation
Note: Keep in safe place
Keep all parts of the transport protection in a safe place for later use. Whenever the ap-
2.4 Moving the appliance
If the machine is to be moved to a distant location, replace the transportation bolts removed
before installation to prevent damage: The assembly takes place in reverse order.
2-6
8
More information https://www.caravansplus.com.au
2.5 Aligning the appliance
Adjust all feet (Fig. 2-6) to achieve a complete level
position. This will minimize vibrations and thus noise
during use. It will also reduce wear and tear. We recom-
mend to use a spirit level for adjustment. Floor should
be as stable and flat as possible.
1. Loose the locknut(M10) (1) by using a wrench.
2. Adjust the high by turning the foot (2).
3. Tighten locknut (1) against the housing.
WARNING!
▶ Mini Washer can not be placed directly on the was-
hing machine and dryer.
NZ AU