10-Troubleshooting - Camec COMPACT RV II User Manual

10-Troubleshooting

of a problem please check all shown possibilities and follow below instructions before you
WARNING!
▶ Before maintenance, deactivate the appliance and disc
the mains socket.
▶
improper repairs can cause considerable consequential damages.
▶ A damaged power cable should only be replaced by the manufacturer, its service
▶ For the safety of the end-user ,self-repair or non-professional repair is not
recommended.Please contact our National Customer Support Team.
10.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message
The remaining wash cycle time will be 1 hour and 25 minutes.
The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 minutes.
Automatic load detection is working; only in some programmes.
Door is closed because of high water level, high water temperature or spinning cycle.
The buzzer is deactivated.
The buzzer is activated.
The function keys is closed.The programme changing is invalid.
10.2 Troubleshooting with display code
Problem Cause
• Drainage error, water is not fully drained
within 6 minutes.
• Lock error.
•
In the main washing water inlet stage and
rinsing water inlet stage, the water does not
reach the set level after the set time
• Drain hose is self-syphoning.
• Water protective level error.
26
See Product Warranty
More information https://www.caravansplus.com.au
onnect the mains plug from
Solution
•
• Check drain hose installation.
• Shut the door properly.
• Make sure that tap is fully opened and water
pressure is normal.
• Check drain hose installation.
• Contact National Customer Support Team
NZ AU