Related Manuals for Camec COMPACT RV II
Summary of Contents for Camec COMPACT RV II
- Page 1 USER MANUAL COMPACT RV II 4KG FRONT LOADING WASHING MACHINE Part No. 053344 NZ AU More information https://www.caravansplus.com.au...
- Page 2 Thank You NZ AU Thank you for purchasing a Camec Product Please read these instructions carefully before using this appliance. The instructions con- tain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.
-
Page 3: Table Of Contents
Content NZ AU 1-Safety information ........................... 4 2-Installation ....................................................3-Product description 4-Control panel ........................... 1 2 5-Programmes ...........................15 6-Consumption ..........................16 7-Daily use ............................17 8-Eco-friendly washing ........................9-Care and cleaning ......................... 10-Troubleshooting ......................... 11-Technical data ..........................29 12-Product Warranty ........................30 More information https://www.caravansplus.com.au... -
Page 4: 1-Safety Information
1-Safety information NZ AU ing safety instructions! WARNING! ▶ Make sure there is no transport damage. ▶ Make sure all transport bolts are removed. ▶ Remove all packaging and keep out of children´s reach. ▶ Handle the appliance always with at least two persons because it is heavy. Daily use ▶... - Page 5 1-Safety information NZ AU WARNING! Daily use ▶ Do not remove or insert the plug in the presence of flammable gas. ▶ Do not hot wash foam rubber or sponge-like materials. ▶ Do not wash any laundry which is polluted with flour. ▶...
- Page 6 1-Safety information NZ AU WARNING! Installation ▶ Install or use the appliance only where the temperature is above 5 °C. ▶ Do not place the appliance directly on a carpet, or close to a wall or furniture. ▶ Do not install the appliance in direct sunlight or in the near of heat sources(e.g.stov- es, heaters).
-
Page 7: 2-Installation
2-Installation NZ AU 2.1 Preparation ▶ Take the appliance out of the packaging. ▶ keep them out of childrens reach. ▶ While opening the package, water drops may be seen on plastic bag and porthole. This normal phenomenon results from water tests in the factory. Note: Packaging disposal Keep all packaging materials out of children´s reach and dispose them in an environmen- tally friendly manner. - Page 8 2-Installation NZ AU Note: Keep in safe place Keep all parts of the transport protection in a safe place for later use. Whenever the ap- 2.4 Moving the appliance If the machine is to be moved to a distant location, replace the transportation bolts removed before installation to prevent damage: The assembly takes place in reverse order.
- Page 9 2-Installation NZ AU 2.6 Drain Water Connection Fix the water drain hose properly to the piping. The hose has to reach at one point a height between 60 to 80 cm above the appliance bottom line! If possible keep always drain WARNING! ▶...
- Page 10 2-Installation NZ AU 2.7 Fresh Water Connection 2-10 2-11 Make sure that the gaskets are inserted. 1. Connect the water inlet hose with the angled end to the appliance (Fig. 2-10). Tighten the screw joint by hand. 2. The other end connect to a water tap with a 3/4“...
-
Page 11: 3-Product Description
3-Product description NZ AU Note: 3.1 Picture of appliance Front (Fig. 3-1): Rear side (Fig. 3-2): 3 4 5 6 Temp. Speed Delay Towels Cotton 20°C Cotton Delicate Quick 1 Transportation bolts (T1-T4) 1 Detergent / 4 Washer door 2 Back cover Softener drawer 5 Service flap 3 Back cover screws (S1-S4) -
Page 12: 4-Control Panel
4-Cont rol panel NZ AU Temp. Speed Delay Towels Cotton 20°C Cotton Delicate Quick Temp. Speed Delay 40-60 Cotton 20°C Cotton Delicate Quick 1 Detergent/softener drawer 2 Function buttons 3 Display 4 Programme buttons 6 “Power” button 4.1 Power Press the “Power” button to start the machine or shut down the machine(Fig. - Page 13 By pressing the buttons, when it is in bright light, the fu- nction is selected. Note: Factory settings To get the best results in each programme, Camec has well defined specific default settings. If there is no special requirement, default settings are recommended. 4.5.1 Function button ”Delay”...
- Page 14 4-Cont rol panel NZ AU 4.5.3 Function button ” Speed” Press this button (Fig.4-9) to change or deselect the spin of the programme. If no value is illuminated the display Speed “ ” the laundry will not spin. 4.5.4 “Start/Pause” button 4-10 Press this button (Fig.4-10) gently to start or interrupt the currently displayed programme.
-
Page 15: 5-Programmes
5-Programmes NZ AU Detergent compartment for: Detergent Softener or care product • Yes, Optional, º Max. load Temperature Preset Function spin speed in kg in °C in rpm selectable Programme range Fabrics type • * to 60 1000 Lightly soiled mixed º... -
Page 16: 6-Consumption
6-Consumption NZ AU Check the energy label for energy consumption information. The actual energy consumption may differ from the declared one according to local conditions. The standard cotton programmes are suitable to clean normally soiled 60°C and 40°C Actual cycle tempe rature. Note: Auto Weight The appliance is equipped with a loading recognition. -
Page 17: 7-Daily Use
7-Daily use NZ AU 7.1 Power supply Connect the washing machine to a power supply (220V to 240V~/50Hz; Fig. 7-1). Please refer also to section INSTALLATION (see P10). 7.2 Water connection ▶ Before connecting check the cleanliness and clar- ity of the water inlet. ▶... - Page 18 7-Daily use NZ AU Care chart Washing Washable up to 95°C Washable up to 60°C Washable up to 60°C normal process normal process mild process Washable up to 40°C Washable up to 40°C Washable up to 40°C normal process mild process very mild process Washable up to 30°C Washable up to 30°C...
- Page 19 7-Daily use NZ AU 7.5 Selecting detergent ▶ ▶ Use only machine wash approved detergent. ▶ ▶ See tips for countertop detergent stickers. ▶ Do not use dry cleaning agents such as trichloroethylene and similar products. Choose the best detergent Kind of detergent Universal Colour...
- Page 20 7-Daily use NZ AU 7.6 Adding detergent 1. Slide out the detergent drawer. 2. Put the required chemicals into corresponding compartments (Fig. 7-4), 3. Push back the drawer gently. Note: ▶ Remove detergent residues before next wash cycle from the detergent drawer. ▶...
- Page 21 7-Daily use NZ AU 7.10 Start wash programme Press “Start/Pause” button (Fig. 7-8) to start. The LED stops flashing and lights up continuously. Appliance operates according to present settings. Changes are only possible by cancelling the programme. 7.11 Interrupt / Switch wash programme To interrupt a running programme press gently “Start/Pause“.
-
Page 22: 8-Eco-Friendly Washing
8-Eco-friendly washing NZ AU Environmentally responsible use ▶ To achieve best use of energy, water, detergent and time you should use the recom- mended maximum load size. ▶ Do not overload (hand width clearance above laundry). ▶ For slightly soiled laundry select the Quick 15’ programme. ▶... -
Page 23: 9-Care And Cleaning
9-Care and cleaning NZ AU 9.1 Cleaning the detergent drawer Ensure there are no detergent residues. Clean the drawer regularly (Fig. 9-1): 1. Pull out the drawer until it stops. 2. Press the release button and remove the drawer. Wipe the inside of the sink clean with a towel. 4. - Page 24 9-Care and cleaning NZ AU 9.5 Long periods of disuse If the appliance is left idle for a longer period: 1. Pull out the electrical plug (Fig. 9-6). 3. Open the door to prevent formation of moisture and odours. Let door open while not used. Before next usage check carefully power cord, water inlet and drain hose.
- Page 25 9-Care and cleaning NZ AU 9-14 9-15 (Fig. 9-14). 10. After cleaning, reinstall the handle and tighten it until it does not move. At this time, the handle is in vertical state (Fig. 9-15). 11. Close service flap. CAUTION! ▶ leakage will occur.
-
Page 26: 10-Troubleshooting
10-Troubleshooting NZ AU of a problem please check all shown possibilities and follow below instructions before you See Product Warranty WARNING! ▶ Before maintenance, deactivate the appliance and disc onnect the mains plug from the mains socket. ▶ improper repairs can cause considerable consequential damages. ▶... - Page 27 10-Troubleshooting NZ AU Problem Cause Solution Temperature sensor error. Contact the National Customer Support Team Heating error. Contact the National Customer Support Team Motor error. Contact the National Customer Support Team Water level sensor error. Contact the National Customer Support Team Abnormal communication error.
- Page 28 10-Troubleshooting NZ AU Problem Cause Solution Excessive foam • Detergent is not a suitable. • Check detergent recommen- dations. • detergent drawer. Excessive use of detergent. • Reduce amount of detergent. • Automatic adjust- Washing programme duration will • This is normal and doesn‘t af- ment of washing be adjusted.
-
Page 29: 11-Technical Data
11- T echnical data NZ AU 11.1 Additional technical data Part No. 053344 220-240 V~/50Hz Voltage in V Current in A Washing load capacity in kg Water consumption value in L/wash Max. power in W 1900 0.03≤P ≤1 Water pressure in MPa Net weight in kg 11.2 Product dimensions FRONT VIEW... -
Page 30: 12-Product Warranty
For further information or assistance, please contact our National Customer Support Team or visit Camec website. 1.Australia on 1300 422 632 or camec.com.au 2.New Zealand on 09 257 2419 or camec.co.nz For any retail or trade enquiries, please contact our Sales office. CAMEC VICTORIA... - Page 31 More information https://www.caravansplus.com.au...
- Page 32 More information https://www.caravansplus.com.au...