Yamaha PLG150-DR Owner's Manual page 11

3
Enable the PLG150-DR/PLG150-PC board for the desired Part.
First, make sure that the appropriate Part is selected (using the [PART –/+] buttons), then press
the [SELECT] button. The icon of the selected board appears in the display and the correspond-
ing LED at the bottom of the panel (PLG-1, -2, or -3) flashes briefly.
4
Select the desired bank number.
Move the cursor to the Bank Number parameter with the [SELECT </>] buttons and use the
[VALUE –/+] buttons to select the desired bank.
5
Select the desired voice number.
Move the cursor to the Voice (Program) Number parameter with the [SELECT </>] buttons and
use the [VALUE –/+] buttons to select the desired voice.
• DR Preset voice : 000, 001-080
• DR User voice
• PC Preset voice : 001, 001-080
• PC User voice
DR Preset voice
Alternately, you can select voices from a connected MIDI keyboard, or from sequencing software
on a connected computer.
For a list of available voices and their bank/voice numbers, see page 26.
: 000, 001-008
: 001, 001-008
DR User voice PC Preset voice
For XG Plug-in System Users
Bank Number parameter
PC User voice
11