Yamaha MU90R Owner's Manual page 151

APPENDIX
00H 01H
00H 02H
7FH 7FH
5 . Channel Mode Messages
Cntrl# Parameter
120 —
Switches off sound from all parts.
Does not reset the settings established by Channel Messages.
Cntrl# Parameter
121 —
Resets the following values to the default: Pitchbend, Modulation, Expression, Sustain,
Portamento, Sostenuto, Registered Parameter Number
Resets Portamento Control. setting. Specifically, clears condition in which source (Porta-
mento Control Message) has been received but target (new Key On) has not.
Cntrl# Parameter
123 —
Switches off all currently "on" notes in all parts. Any notes being held by sustain or sostenuto
continue to sound until sustain/sostenuto goes off.
Cntrl# Parameter
124 —
Same processing as for All Notes Off.
Cntrl# Parameter
125 —
Same processing as for All Notes Off. ("OMNI ON" operation not supported.)
142
mmH Fine Tune
mmH Coarse Tune
Null
Data Range
0
Data Range
0
Data Range
0
Data Range
0
Data Range
0
mm: 00H-40H-7FH (-64-0-+63)
Default: 40 00H
mm: 00H-40H-7FH (-64-0-+63)
Default: 40 00H
—