NOTE
•
Selecting a Part does not apply to the Utility controls or Effect controls,
except for the Send Level parameters (pages 57, 59, 61) and Dry Level
(when Variation Connection is set to "SYS"; page 62).
Once you've selected a certain parameter, you can instantly return to
that parameter from the Play mode by simply pressing the PLAY/
EDIT button.
C Change the setting or value.
Use the VALUE buttons. You can rapidly increase or decrease the
value by holding down the appropriate button. For even faster
editing, simultaneously hold down one button, and then press (or
hold down) the other. For example, to rapidly decrease the value,
simultaneously hold down the
button.
Part Controls
Volume
Pan
Note Shift
Solo
Mute
Filter
EG
Vibrato
E d i t M o d e
/NO button and press the
Cutoff
Resonance
Attack Time
Release Time
Rate
Depth
Delay
................ 46
................ 47
................ 47
................ 48
................ 49
................ 50
................ 51
.......... 52, 53
.......... 52, 53
................ 54
................ 54
................ 55
/YES
45