Yamaha MU15 Owner's Manual page 34

P l a y i n g t h e M U 1 5
Operation
Z Select the desired Part.
Do this in the normal way, by using the PART buttons.
X Set Variation Connection to "SYS" (System).
Setting the Variation Connection parameter to "SYS" allows you to
use the Variation effect for all Parts. (For instructions on using the
"INS" or Insertion setting, see the boxed section on page 35.)
To do this, simultaneously hold down the PLAY/EDIT button and
press the INS SYS button, and then set the parameter to "SYS," by
pressing the VALUE /YES button.
SYS
C Set the Send Level controls to appropriate values.
Before you actually change the Variation settings, you should set the
Send Level controls, in order to properly hear the effect and the
changes you make.
To do this, simultaneously hold down the PLAY/EDIT button and
press the VARIATION SEND LVL button, and then set the value to
"60" or higher, by using the VALUE buttons.
VarSend
V Select the Variation Type parameter.
Simultaneously hold down the PLAY/EDIT button and press the
VARIATION TYPE button.
DelayLCR
34