Table of Contents
Advertisement
MOUNTING_
METAL SLEEVE (fig.10)
• Install the metal sleeve (dimension 182x53 mm) in
the dashboard. For optimal performance of the CD
player*, the metal sleeve should be positioned
horizontally (between -10° and +30°).
• Fix metal sleeve into place by pressing the metal
tags outwards using a screwdriver.
CONNECTING THE RADIO (fig.9)
• Ensure the battery is disconnected.
• Insert aerial plug E in the matching socket.
Use hook (J) on back of set to secure fixing.
• Insert power supply connector A into socket
A1.
• Insert loudspeaker connector B into socket B1.
• (optional) Remove the protective cover from
socket C1.
• (optional) Insert the yellow line-out connector
Cl into socket Cl'.
• (optional) Insert the blue CD changer connector
C3 into socket C3'.
• (optional) Insert the green connector C2 into
socket C2'.
The green connector slides between the yellow
connector Cl and the blue connector C3.
You need at least one of these connections to
keep C2 in place.
MOUNTING RADIO
This radio can be properly installed either from
conventional Front Mounting or Rear Mounting,
depending on DIN/JIN opening of the car's
dashboard.
FRONT MOUNTING
• Slide the radio into the metal sleeve until the
springs at either side of the radio snap into the
openings of the sleeve (fig. 11).
• Finally reconnect the negative car battery
terminal (fig. 12).
REMOVING RADIO (using the two U- brackets
supplied)
• Remove the trimplate around the front panel.
• Insert both U-brackets into the holes on the
front of the set until they lock. Pull out the radio
(fig 13).
REAR MOUNTING (fig.14)
• Remove the trimplate around the front panel
and the side springs.
• Select a position where the screw holes of the
mounting bracket and the screw holes of the
radio become aligned and tighten the screws
at 2 places on each side.
•
Only use M5 selftapping screws that are
not longer than 6mm.
REPLACING FUSE (fig. 9)
• Replace with a 10A blade-type fuse. The new
fuse must be of exactly this value and type
otherwise the set will not be adequately
protected. Ignoring this procedure may lead to
damage to the set, which will invalidate the
guarantee.
INTERFERENCE SUPPRESSION
• Most modern cars have sufficient interference
suppression. If you experience interference
generated by the car, consult your dealer.
Depending on version
Advertisement
Table of Contents
