Installing/Mounting
4.3 Determining a location
In applications with strong vibrations, Siemens recommends remote mounting of the
transmitter!
4.3
Determining a location
Note
The sensor must always be completely filled with liquid.
Figure 4-2
• Avoid the following installations
– Installation at the highest point in the pipe system
– Installation in vertical pipes with free outlet
18
CAUTION
Correct installation with filled pipes
Figure 4-3
Wrong installation at high point
Figure 4-4
Correct installation at low point before outlet
Operating Instructions, 01/2024, A5E52677520-AA
SITRANS FMS500