Alert Display - Yamaha FS1R Owner's Manual

Bulk Received
This message will be displayed for approximately 1 second when MIDI bulk data is received.
Battery Low
This message will appear when the memory backup battery voltage becomes too low to maintain the contents of the
FS1R internal memory. The message will appear only when the power is initially turned on, and will remain on the
display only until a button is pressed. When the "Battery Low" display has appeared, all internal performance, voice,
and system data will be lost as soon as the power is turned off. If possible, use the UTILITY mode DUMPOUT
function to dump the internal data to an external storage device (page 77), and have the backup battery replaced
as soon as possible at your Yamaha dealer or an authorized Yamaha service station.
Illegal Data
This message will appear when an error occurs while receiving MIDI data. If this occurs, the MIDI receive buffer will
be cleared and any notes which are sounding will be turned off. The "Illegal Data" message will remain on the
display until a button is pressed. MIDI data errors can be caused by MIDI cables which are too long, or improper
MIDI settings. Check your MIDI equipment carefully.
MIDI Buffer Full
This message indicates that the FS1R MIDI buffer has become full during MIDI data reception. If this occurs, the
MIDI receive buffer will be cleared and any notes which are sounding will be turned off. The "MIDI Buffer Full"
message will remain on the display until a button is pressed. If this occurs it is probably necessary to increase the
bulk transmission interval time on the transmitting MIDI device.
System Exclusive Address Error
This message indicates that an address error was detected in received MIDI parameter change (System Exclusive)
data. If this occurs the received data will be ignored. The "System Exclusive Address Error" message will remain on
the display until a button is pressed. Refer to the MIDI Data Format section in the separate "Data List" booklet for
System Exclusive message address information.
System Exclusive Data Size Error
This message will appear if a received MIDI bulk transmission is of the wrong size. If this occurs the received data
will be ignored. The "System Exclusive Data Size Error" message will remain on the display until a button is pressed.
Refer to the MIDI Data Format section in the separate "Data List" booklet for System Exclusive data size information.
System Exclusive Checksum Error
This message will appear if a received MIDI bulk transmission has the wrong checksum. If this occurs the received
data will be ignored. The "System Exclusive Checksum Error" message will remain on the display until a button is
pressed.
Alert Displays
82