Sns (Sensitivity) - Yamaha FS1R Owner's Manual

• 04: Decay Time (V & N)
Decay Time
Settings: 0 ... 99
These four parameters determine the shape of the frequency envelope generator for the selected operator. The
envelope starts at the initial level ("InitLevel") at key-on, and then approaches the attack level ("AttackLevel") at a
speed determined by the "Attack Time" parameter. Then the envelope approaches the normal pitch (0) again at a
speed determined by the setting of the "Decay Time" parameter.
n
The Frequency EQ Hold Time is determined by the Amplitude EG Hold Time setting (page 66).
n
The Freq Mode parameter should be set to "normal" when the frequency envelope generator is applied to an unvoiced operator. If any
other mode is selected asterisks (*) will appear in place of the values for these parameters, and no settings can be made.

Sns (Sensitivity)

• 01: Amp Velocity (V & N)
Amplitude Velocity
Settings: -7 ... +7
Determines how the output level of the current operator changes in response to velocity changes (e.g. keyboard
dynamics). Plus "+" settings produce higher output level in response to higher velocity values - i.e. the harder a key
is played, the louder the sound. The maximum setting of "+7" produces the maximum level variation in response to
velocity changes. Minus "-" settings produce the opposite effect: lower level in response to higher velocity. A setting
of "+0" results in no level variation.
• 02: FreqVelocity (V & N)
Frequency Velocity (Only available when voiced operator FreqMode = fixed, or unvoiced operator FreqMode =
normal)
Settings: -7 ... +7
Determines how the frequency of the current operator changes in response to velocity changes (e.g. keyboard
dynamics). Plus "+" settings shift the frequency upward in response to higher velocity values - i.e. the harder a key
is played, the higher the frequency. The maximum setting of "+7" produces the maximum frequency variation in
response to velocity changes. Minus "-" settings produce the opposite effect: lower frequency in response to higher
velocity. A setting of "+0" results in no frequency variation.
When the FreqMode of an unvoiced operator is set to "linkFF", the frequency of the unvoiced operator will vary
according to the voiced operator FreqVelocity setting.
Pitch
+50
(+4800 cent)
Attack Time
Init Level
0
Key On
-50
(+4800 cent)
68
Decay Time
Zeit
Attack Level