Perf Ch (Performance Channel); (Bank); (Program Number); Pfm Vol (Performance Volume) - Yamaha FS1R Owner's Manual

Perf Ch (Performance Channel)

Settings: off, 001 ... 016, all
The Perf Ch parameter specifies the MIDI channel via which MIDI bank select, program change, volume, and pan
messages will be received for the PERFORMANCE PLAY mode. FS1R performance setups can be switched via
MIDI bank select and program change messages transmitted via this channel. MIDI performance volume and
performance pan messages received via the Performance Channel will have the same effect as when received via
the individual part receive channels (see "The PART ASSIGN Mode", page 24).
The "all" setting allows reception on all channels.
When "off", received bank select, program change, volume and pan messages will be received according to the
part Receive Channel.
n
When the UTILITY mode SYSTEM/MIDI/PgmMode parameter is set to "perform" (e.g. when playing the FS1R from a keyboard or other MIDI
controller) and the PLAY mode Pfm Ch parameter is set to any value other than "off", all received bank select, program change, volume,
and pan data affects the overall performance setup, not individual parts. All other received MIDI channel messages affect individual parts
on the corresponding MIDI channels.
n
When the UTILITY mode SYSTEM/MIDI/PgmMode parameter is set to "multi" (e.g. when playing the FS1R from a sequencer or computer),
the FS1R functions as a multi-timbre tone generator, allowing the parts to be individually controlled via their respective MIDI channels. If the
PLAY mode Pfm Ch parameter is set to any value other than "off", however, all bank select, program change, volume, and pan data
received on the specified performance channel will affect the overall performance setup, not individual parts.
n
In either of the above cases, if the PLAY mode Pfm Ch parameter is set to "off" then channel messages received on any channel will only
affect the individual part assigned to the corresponding channel.

(Bank)

Settings: Int, PrA, PrB, PrC
Selects the FS1R Internal (Int), PRESET A (PrA), PRESET B (PrB), or PRESET C (PrC) bank (see "Voice Organization"
on page 21).

(Program Number)

Settings: 001 ... 128
Selects the performance setup to played on the FS1R. The Int, PrA, PrB, and PrC banks each have program
numbers from "001" to "128".

Pfm Vol (Performance Volume)

Settings: 000 ... 127
Sets the volume of the current performance setup. The higher the value the louder the volume.

Pfm Pan (Performance Pan)

Settings: L63 ... Cnt ... R63
Sets the pan position of the current performance setup - i.e. the position of the sound between left and right in the
stereo sound field. A setting of "L63: sets the pan position full left, "C" sets the pan at center, and "R63" sets the pan
full right. In between settings produce corresponding intermediate pan positions.

RevRtn (Reverb Return)

Settings: 000 ... 127
Adjusts the level of the signal returned from the FS1R reverb effect stage. The higher the value, the higher the level
of the reverb signal.
23