Specifications - Panasonic EYSDA Series Operating Instructions Manual

CAPACITY AND SPECIFICATIONS
Tool Capacity
Model No.
Recommended Work
Torque Setting Range 0.3 N ・ m to 2.5 N ・ m
Torque Setting Steps
Fastening Torque
Accuracy*
Speed
<Measurement conditions>
Based on our specified measurement conditions.
* Fastening torque and fastening torque accuracy vary depending on the work status.
Be sure to check them with actual work before use.
Tool Specifications
Power Supply
Motor
Bit Holder
Size (Estimated
Dimensions)
Mass (Weight)
Trigger Switch Mode
Notification (Lamp)
Common

Specifications

Included Items
Separately Sold Items • Screwdriver cord (2 m/3 m)
These specifications are subject to change for performance improvement.
EYSDA212XD
Machine screw:
M2.5 to M4.5
96 steps
±10%
1200 revolutions per
minute
Power supplied by power adapter (sold separately) 100 to 240 V AC 50/60 Hz
Brushless motor (30 V DC)
One-touch bit locking mechanism
Applicable bits ( hex shank of 6.35 mm across flats,
single-ended 9 mm to 13 mm, double-ended 12 mm to 17.5 mm)
Overall Length: 271 mm / Grip diameter: φ38 mm
About 630 g
Both lever start mode and push start mode available (Switchable on a
single unit)
3-colour display (Detection lamp)
Rotation direction switching (Forward/Reverse)
• Screwdriver cord (2 m)
• Screwdriver hanger
• Clutch cover
• Grip attachment (Supplied for EYSDA407XD only)
• Screwdriver hanger
• Clutch cover
• Grip attachment
• Power adapter (with a power cord)
EYSDA218XD
Machine screw:
M2.5 to M4
0.3 N ・ m to 2.0 N ・ m
1800 revolutions per
minute
EYSDA407XD
Machine screw:
M3.5 to M5
1.5 N ・ m to 4.4 N ・ m
650 revolutions per
minute
19
EN