Drum Kit Common Parameters; Volume; Drum Reverb Send; Hi-Hat Sensitivity - Yamaha DTXPRESS III Owner's Manual

Drum trigger module
Hide thumbs Also See for DTXPRESS III:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Drum Kit Voice Edit Mode

5. Drum Kit Common Parameters

This function sets the common settings for the entire drum kit.
The Drum Kit Common Parameters are divided into the following
5 pages.

5-1. Volume ............................................................ 24

5-2. Drum Reverb Send .......................................... 24

5-3. Hi-Hat Sensitivity ............................................. 24

5-4. Song Select ..................................................... 24

5-5. Drum Kit Name ................................................ 24

5-1. Volume
Sets the overall volume for the drum voice.
q Volume
[Range] 0-127
5-2. Drum Reverb Send
Sets the overall reverb send level of the drum voice.
q DrumRevSend (Drum Reverb Send Level)
[Range] 0-127
The actual reverb send level will be determined by multiplying the
reverb send level set in [2-2. Reverb Send] (P. 20) with the value
set here.
5-3. Hi-Hat Sensitivity
Sets the foot controller sensitivity connected to HI-HAT CON-
TROL jack on the rear panel.
q HH Sensitivty
[Range] 0-63
Larger values provide higher sensitivity.
24
This parameter allows you to switch the main song q at the same
time the drum kit is switched.
q Song Select (Song Number)
Assign the song number to select the song for playback. The song
will not be switched if the setting is set to "
w q (Tempo)
Assign the tempo that will be used. If "
not change .
q
Changes the drum kit name that is currently selected for editing.
q Kit (Drum Kit Name)
q
Procedure
1. In the display shown above, use the [SEL<]/[SEL>] but-
2. Use the [VALUE–]/[VALUE+] buttons to select the alpha-
3. Repeat steps 1 and 2 above to create the Drum Kit Name
q
5-4. Song Select
q
[Range] —, 1-127
[Range] —, 30-300
5-5. Drum Kit Name
tons to move the cursor to the character you want to
change.
bet, number or symbol.
using a maximum of 12 characters.
The available characters to choose from are (in order):
space
w
".
" is set, the tempo will
q

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents