Drum Kit Common Parameters; Volume; Drum Reverb Send; Hi-Hat Sensitivity - Yamaha DTXPRESS Owner's Manual

5. Drum Kit Common Parameters

This function sets the common settings for the entire drum kit.
The Drum Kit Common Parameters are divided into the following
5 pages.

5-1. Volume ............................................................ 47

5-2. Drum Reverb Send .......................................... 47

5-3. Hi-Hat Sensitivity ............................................. 47

5-4. Song Select ..................................................... 47

5-5. Drum Kit Name ................................................ 47

5-1. Volume
Sets the overall volume for the drum voice.
KIT Common
Volume=
q Volume
[Range] 0-127
5-2. Drum Reverb Send
Sets the overall reverb send level of the drum voice.
KIT Common
DrumRevSend
q DrumRevSend (Drum Reverb Send Level)
[Range] 0-127
The actual reverb send level will be determined by multiplying the
reverb send level set in [2-2. Reverb Send] (P. 43) with the value
set here.
5-3. Hi-Hat Sensitivity
Sets the foot controller sensitivity connected to HI-HAT CON-
TROL jack on the rear panel.
KIT Common
HH Sensitivty=32
q HH Sensitivty
[Range] 0-63
Larger values provide higher sensitivity.
q
127
q
40
q
5-4. Song Select
This parameter allows you to switch the main song q at the same
time the drum kit is switched.
KIT Common
SongSel=110ƒ=120
q
q Song Select (Song Number)
[Range] —, 1-127
Assign the song number to select the song for playback. The song
will not be switched if the setting is set to "---".
w q (Tempo)
[Range] —, 30-300
Assign the tempo that will be used. If "---" is set, the tempo will
not change .
5-5. Drum Kit Name
Changes the drum kit name that is currently selected for editing.
KIT Common
KitName=Acoustic
q KitName (Drum Kit Name)
Procedure
1. In the display shown above, use the [SEL<]/[SEL>] but-
tons to move the cursor to the character you want to
change.
2. Use the [VALUE–]/[VALUE+] buttons to select the alpha-
bet, number or symbol.
3. Repeat steps 1 and 2 above to create the Drum Kit Name
using a maximum of 8 characters.
● The available characters to choose from are (in order):
space
!"#$%&'()*+,-./0123456789:;<=>?@
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`
abcdefghijklmnopqrstuvwxyz{|}ßå
Drum Kit Voice Edit Mode
w
q
47