Table of Contents
Advertisement
Configure the Device
Parameter
Daylight
Saving Time
Device Time
Current PC
Time
Set Manually
NTP
NTP Server
Addr
NTP Port
Check the
time interval
(at least 10 s)
Step 2 Select a time zone from the Time Zone drop-down list box.
Step 3 (Optional) Click the button on to enable Daylight Saving Time and specify the DST start time and
end time.
Step 4 Modify the device time.
Synchronizing time from the PC
Issue V1.0 (2023-02-10)
Description
When the DST start time arrives, the
device time automatically goes forward
one hour. When the DST end time
arrives, the device time automatically
goes backward one hour.
NOTE
DST is the practice of advancing clocks so that
evenings have more daylight and mornings
have less. Currently, about 110 countries in the
world use DST. Different countries have
different DST provisions. Since March 27,
2011, Russia has started to use permanent
DST.
Device display time.
Time on the current PC.
Enables you to manually set the device
time.
IP address or domain name of the NTP
server.
The NTP server IP.
Port number of the NTP server.
Set time interval to check if the device
time synchronizes with the NTP server
time.
Camera User Manual
Setting
[Setting method]
Click the button on to enable
Daylight Saving Time.
[Setting method]
Synchronize the time
from the PC.
Enter a value manually.
N/A
[Setting method]
Click Set Manually and set
the date and time in the
format YYYY-MM-DD
HH:MM: SS.
[Setting method]
Click the button on to enable
NTP and enter a value
manually.
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
[Default value]
123
[Setting method]
Enter a value manually.
[Default value]
3600
54
Advertisement
Table of Contents
