Table of Contents
Advertisement
Camera User Manual
Restart a Device
Description
Restart a device including but not limited to the following situations:
The device parameters are set incorrectly, and the device cannot work properly.
A user needs to reset device parameters and make it to take effect.
A device needs to be restarted remotely.
Procedure
Step 1 Choose Configuration > Maintenance.
The Camera Maintenance page is as shown in Figure 17-1.
Step 2 Click
The message "Are you sure to restart?" is displayed.
Step 3 Click OK.
The device is restarted successfully five minutes later.
----End
Issue V1.0 (2023-02-10)
Camera Restart Page
.
17 Maintain the Device
Maintain the Device
159
Advertisement
Table of Contents
