Table of Contents
Advertisement
Camera User Manual
Step 2 Set all parameters of intrusion. Table 7-1 describes the specific parameters.
Parameter
Mode (only for
PTZ camera)
Enable
Sensitivity
Issue V1.0 (2023-02-10)
Intrusion Parameter Description
Description
There are two modes can be chosen, normal
mode and preset point mode.
When you choose the preset point mode, please
choose one which is set in advanced.
Enable the button to enable the alarm.
The sensitivity of detecting the target, when the
value is high, the target can be detected easily,
but the accuracy will be lower.
Configure Intelligent Analysis
Setting
[How to set]
Choose from the drop-
down list
[Default value]
Normal mode
[How to set]
Click the button on.
[Default value]
OFF
[How to set]
Choose from the drop-
down list
[Default value]
5
73
Advertisement
Table of Contents
