Table of Contents
Advertisement
Camera User Manual
Step 4 Click Apply.
The message "Apply success!" is displayed, and the system saves the settings.
-----End
11.2.3 Configure the NAS
Procedure
Step 1 Choose Configuration > Device Record > Record Directory.
Step 2 Choose NAS, click Modify.
The NAS Record Path Modify page is displayed, as shown in Figure 11-6.
Step 3 Set the parameters according to Table 11-5.
Parameter
NAS
IP Address
Path
User Name
Password
Issue V1.0 (2023-02-10)
NAS Record Path Modify page
NAS recording parameters
Description
Enable to use NAS (Network
Attached Storage) to record the
video.
IP address of NAS server.
IP address of NAS device.
NAS device account.
NAS device Password.
Configure the Recording Function
Setting
[Setting method]
Enable
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
125
Advertisement
Table of Contents
