Table of Contents
Advertisement
Front Suspension Adjustments
3. Remove the handlebar pad.
Remove the washers/handlebar holder nuts
(3), mounting rubbers and handlebar (4).
NOTICE
Keep the master cylinder upright to prevent air
from entering system.
(3)
(3) washers/handlebar holder nuts
(4) handlebar
4. Loosen the upper pinch bolts (5).
5. Loosen the fork damper (6), but do not
remove them yet.
NOTICE
Do not use an adjustable wrench to loosen the
fork damper: it may damage them.
Loosen the upper pinch bolts before loosening
the fork damper to avoid damping the fork cap.
(5)
(5) upper pinch bolts
(6) fork damper
84
Adjustments for Competition
6. Remove the disc cover (7) by removing the
disc cover bolts (8).
(7)
(8)
(4)
(7) disc cover
7. Remove the front axle nut (9) and loosen the
front axle pinch bolts (10) on both forks.
Pull the front axle shaft (11) out of the wheel
hub and remove the front wheel.
(10)
(11)
(9) axle nut
(10) axle pinch bolts
(6)
8. Remove the fork protector bolts (12), brake
hose clamp bolts (13) and fork protectors
(14).
9. Remove the brake caliper bolts (15) and brake
caliper (16).
NOTICE
Do not support the brake caliper by the brake
hose. Do not operate the brake lever after the
front wheel is removed. To do so will cause
difficulty in fitting the brake disc between the
brake pads.
(8) disc cover bolts
(12) fork protector bolts
(13) brake hose clamp bolts (16) brake caliper
(14) fork protectors
(10)
10. Loosen the fork leg lower pinch bolts (17),
(9)
(11) front axle shaft
(17) lower pinch bolts
(13)
(14)
(15)
(12)
(16)
(12)
(15) brake caliper bolts
then pull the fork legs down and out.
(17)
Advertisement
Table of Contents
