Honda CR250R 2006 Owner's Manual & Competition Handbook page 45

8. Apply a thin coat of Honda White Lithium
Grease or an equivalent, to the sealing
surface.
9. Assemble the air cleaner and holder.
Insert the pin (5) to the hole (6), and the air
cleaner retaining bolt through the assembly.
(6)
(5) pin (6) hole
10. Insert the pin in the air cleaner housing hole
(7) and install the assembly into the air
cleaner housing (8) while aligning the tab (9)
on the air cleaner and the reference mark (10)
on the air cleaner housing. Tighten the
retaining bolt securely.
Carefully position the sealing flange of the
element to prevent dirt intrusion.
NOTICE
Improper installation of the air cleaner assembly
may allow dirt and dust to enter the engine and
cause rapid wear of the piston rings and cylinder.
(5)
(10)
(7)
(5)
(3) air cleaner
(4) air cleaner holder
(5) pin
(7) air cleaner housing hole
11. Reinstall the seat (page 29), making sure it is
(3)
(9)
(8)
(3)
(4)
(8) air cleaner housing
(9) tab
(10) reference mark
Air Cleaner
securely attached.
Servicing Your Honda
41