Yamaha CC-90 Owner's Manual page 41

HOW TO USE THE BUILT-IN TIMER
Preamplifier/Tuner
DISPLAY TIMER TAPE
POWER
Tape Deck
EMPTY
TUNER
4 1
Timer recording
(To record a tuner program)
1
Load a blank tape into the cassette compartment.
2
Tune to the station of which program you want to record.
3
Follow step 2 of the "Timer play" on pages 37 and 38.
* However, in step 2-
button twice so that "REC" flashes on the display.
While "REC" is flashing, press the TUNER input
selector button.
4
If desired, change the setting of the reverse mode switch
and the Dolby NR switch.
5
If you will not use this unit untill the timer recording
begins, turn the power off by pressing the POWER switch
or the TIMER button.
To confirm the timer time setting
Press the DISPLAY button.
To cancel the setting of timer recording
Press the DISPLAY button once or more so that "REC"
flashes on the display. While "REC" is flashing, press the
TAPE input selector button.
* Unless the AC supply lead is unplugged or there is a
power failure for more than 30 minutes, the time set on
the timer will be retained until it is reset.
Note
When the timer recording is finished, the timer setting is
automatically canceled to avoid repeating timer recording of
the same setting.
39
,
press the TAPE input selector