Yamaha CC-90 Owner's Manual page 13

PREPARATION FOR USE
CTX-S90
KX-S90
R L
PRE OUT
CTX-S90
CDC-S90
R L
INPUT
MX-S90
System connection
•
Connect the red connector on the rear of CDC-S90 to the
red socket on the rear of CTX-S90.
•
Connect the black connector on the rear of KX-S90 to the
black socket.
How to disconnect the system connector
Grasp both sides of the connector to disconnect the
connector.
•
Connect the PRE OUT terminals on the rear of CTX-S90
to the INPUT terminals on the rear of MX-S90 by using
the supplied pin-type audio connection cords.
Make connections correctly from "R" (right) to "R" and
from "L" (left) to "L".
11