Selecting Layers - Yamaha 02R96 Owner's Manual

Selecting Layers

Input and Output Channels are arranged into Layers, as illustrated below. There are four
Layers altogether: two Input Channel Layers, a Master Layer (or Output Layer), and a
Remote Layer.
Input Channels 49–56, Aux Sends, Bus Outs [MASTER]
To select Input and Output Channels for editing with the channel strip
controls, you use the LAYER buttons to select a Layer.
The LAYER button indicator for the currently selected Layer lights up.
The currently selected Layer determines the function of the channel
strip Encoders, [AUTO] buttons, [SEL] buttons, [SOLO] buttons,
[ON] buttons , and faders. For example, when Layer 1–24 is selected,
[SEL] button #1 controls Input Channel #1. When Layer 25–48 is
selected, it controls Input Channel #25. And when the Master Layer is
selected, it controls Input Channel #49.
The following table shows which Input and Output Channels are controlled by the channel
strips on each Layer.
Layers
1–24
25–48
MASTER
REMOTE
The exact function of each channel strip fader and Encoder also depends on the currently
selected Fader mode and Encoder mode respectively. See "Selecting Fader Modes" on
page 49 and "Selecting Encoder Modes" on page 50 for more information.
Input Channels [1–24]
Input Channels [25–48]
[REMOTE]
1–8
Input Channels 49–56
Operation depends on the selected target.
See "About the Remote Layer" on page 219 for more information.
Selecting Layers
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Channel Strips
9–16
Input Channels 1–24
Input Channels 25–48
Aux Send masters 1–8
02R96 Version 2—Owner's Manual
47
19 20 21 22 23 24
19 20 21 22 23 24
19 20 21 22 23 24
19 20 21 22 23 24
LAYER
1 24 REMOTE
25 48 MASTER
17–24
Bus Out masters 1–8