Yamaha A3000 Owner's Manual page 35

correspondingly better. On fast computers you will want to uncheck this
item, and check it on slower computers.
•Up/Down sensitive Auto Snap
If this is checked, Auto Snap will be performed so that the upward/downward
level slope of the start and end points will match (unless the View menu
item Auto Snap is set to "None"). If this is not checked, the start or end
point will be adjusted to a location where the level matches, regardless of
the upward/downward level slope at that point.
•Full scan on open...
If this is checked, opening a sound file will first cause all data to be
scanned in order to create waveform display data. Editing operations will
not be possible until data scan is completed or the [Abort] button is used
to abort the operation.
*Even if you click the [Abort] during data scan, the remainder of the
operation will be continued in the background.
*If this is not checked, data scan will be carried on in the background.
•Full scan after editing...
If this is checked, all data will be scanned after each editing operation to
create waveform display data. Editing operations will not be possible until
data scan is completed or the [Abort] button is used to abort the operation.
*Even if you click the [Abort] during data scan, the remainder of the
operation will be continued in the background.
*If this is not checked, data scan will be carried on in the background.
[9. Window menu]
9.1. Hide (or Show) Tag Window
This toggles the Tag window between visible and hidden.
9.2. Hide (or Show) Transport
This toggles the Transport window between visible and hidden.
- 21 -