Yamaha A3000 Owner's Manual page 27

selected region will be calculated, and the inverse of this value will be
added to each sample. After this command has been executed, the value that
was actually added will be displayed.
If you select Specify Offset Value, the value that you specify will be added
to each sample in the selected range.
*If you play back data that includes a significant direct current portion,
your speakers or headphones may be damaged. Please use appropriate caution.
[7. View menu]
7.1. Go to
Specifies the portion of the sound data that will be shown in the waveform
display.
<Top>
Display the beginning of the sound data.
<End>
Display the end of the sound data.
<Selection Top>
Display the beginning of the selected region.
<Selection End>
Display the end of the selected region.
<Loop Top>
Display the beginning of the loop region.
<Loop End>
Display the end of the loop region.
<Play Location>
Display the playback start location.
7.2. Zoom
Modifies the resolution of the waveform display.
<Vertical Full Zoom In>
- 13 -