Table of Contents
Advertisement
Festa Smart Switch
3.4
Power On
Plug the negative connector of the provided power cord into the power socket of the device and plug
the positive connector into a power outlet as the following figure shows.
Figure 3-3
Connecting to Power Supply
Note:
The figure is to illustrate the application and principle. The provided plug and the socket in your
region may differ from the figures above.
3.5
Initialization
After the device is powered on, it begins the Power-On Self-Test. A series of tests run automatically
to ensure the device functions properly. During this time, its LED indicators will respond in the
following order:
1. The PWR LED indicator lights on all the time. The SYS LED and the LED indicators of all the ports
keep off.
2. (For Festa FS318GP) After about one minute, all LED indicators will turn green, and then the LED
indicators of all the ports will turn yellow momentarily. Subsequently, all LED indicators except the
PWR LED will turn off.
(For Festa FS328GP/FS352GP) After about one minute, all LED indicators will turn green, and then
the FAN indicator and LED indicators of all the ports will turn yellow momentarily. Subsequently, all
LED indicators except the PWR LED will turn off.
3. Several seconds later, the SYS LED indicator will flash, which represents a successful initialization.
09
Connection
Advertisement
Table of Contents
