Advertisement
Controls & Connectors
Front
1
VOLUME
BASS
2
3
(Right speaker)
1 VOLUME control
Allows you to adjust the volume level of the entire
speaker system.
Rotating the control clockwise will increase the
volume level, and rotating the control counter-
clockwise will decrease the level.
2
(standby/on) button/indicator
Press this button to turn on the power to the speaker
system. Its indicator lights up. Press the button
again to set the speaker system to standby mode.
Before pressing this button, make sure that the
VOLUME control setting is lowered. A small elec-
trical current flows through the speaker system
even if the standby/on button is turned off.
3 BASS control
Allows you to adjust the volume level of the low
range.
Rotating the control clockwise will increase the
volume level, and rotating the control counter-
clockwise will decrease the level.
4 TREBLE control
Allows you to adjust the volume level of the high
range.
Rotating the control clockwise will increase the
volume level, and rotating the control counter-
clockwise will decrease the level.
5 3D SURROUND switch
Turn this switch on to add 3D surround sound to
the stereo source sound.
Press the switch to turn on the surround effect.
Press it again to turn off the effect. This setting
does not simulate the surround effect through the
headphones.
3
E-
6
TREBLE
3D SURROUND
4
5
7
INPUT 1
INPUT 2
8
TO LEFT
SPEAKER
9
OUTPUT
(ADJ.VOL)
DC 15V
0
(Right speaker)
6
Headphone jack
Connect a pair of stereo headphones here to moni-
tor the sound. When you connect the headphones,
the speakers will not output sound.
7 INPUT 1/2
You can input two audio sources to the speaker
system from these input jacks simultaneously. For
example, you can connect the output of a CD
player and a personal computer here. The two
audio sources are mixed together by the speaker
system.
8 TO LEFT SPEAKER (on the right speaker)
Use the RCA plug cable to connect this jack to the
ATO RIGHT SPEAKER jack on the right speaker
to this connector.
9 OUTPUT (ADJ. VOL)
Use a 3.5mm stereo mini plug cable to connect this
jack to a subwoofer to reinforce the low range.
0 DC connector
Connect the included AC adaptor to this connector.
Press the
(standby/on) button on the right
speaker to turn the power on or standby.
A TO RIGHT SPEAKER (on the left speaker)
Use the RCA plug cable to connect this jack to the
8TO LEFT SPEAKER jack on the right speaker
to this connector.
Rear
TO RIGHT
SPEAKER
A
(Left speaker)
Advertisement
