Taper Satin Stitch Exercise - Husqvarna VIKING Designer RUBY 90 User Manual

Taper Satin Stitch Exercise

The taper stitch automatically tapers the satin stitch for
corners and points and can be used for satin stitch lettering.
Try the satin stitch exercise and stitch a corner of the tapered
satin stitch on a piece of stabilized fabric.
1. Select stitch Q1 in menu Q - Decorative tapering stitches.
2. Open tapering and select 45 degrees for both beginning
and end.
Note: For a wider satin stitch, adjust the stitch width control.
3. Activate needle stop up/down on your machine and start
to sew. The machine will sew the tapered point and then
continue with a satin stitch at the selected width.
4. When the satin stitch is as long as desired, touch the
reverse button. This will start the end tapering.
5. Turn your fabric to continue with the next tapered satin
stitch. Activate the STOP function to repeat the
previously stitched length, including the beginning and
end tapers.
7 Sewing 101