Fan Control In Heating Thermo - Off - Mitsubishi Heavy Industries SRK20ZT-WA User Manual

Fan control in heating thermo - OFF

■ When the room temperature reaches the set temperature during heating operation, the heating thermostat turns OFF.
Fan control in heating thermo - OFF can be selected.
1
Select the Fan control in heating thermo - OFF by
pressing the MENU switch.
2
Select the Fan control by pressing the " or
button.
Normal Fireplace
function function
The air-conditioner controls the FAN SPEED
automatically.
The unit operates at the FAN SPEED set by the
remote control.
Heat generated from other heat sources can be
circulated in the room by operating the indoor fan
continuously.
The indoor fan starts and stops the operation at
regular intervals in order to avoid cold draft during
heating thermo - OFF.
The indoor fan stops. To use this function additional
work is required, so consult your dealer.
Otherwise, it may take time to return to heating and
the heating capacity may be insufficient.
3
Press the SET button.
NOTICE
 Once Fan control in heating thermo - OFF is configured, it is stored in the
air-conditioner even if the power source is turned off. To change Fan control in
heating thermo - OFF, set again with the remote control.
 In case of SCM multi system, Fireplace function may warm the room
excessively.
EN-29
(TIMER)"
Interval Stop
function function