Mitsubishi Heavy Industries SRK20ZT-WA User Manual page 26

How to cancel the setting <Individual setting>
How to cancel the setting <Collective setting>
■ When the same operation contents exist in the same program number of all the days of the week, collective erase is allowed. In Step 2
above, select "all of the days of the week". The procedure from Step 3 is the same as that indicated above.
If the operation contents have been changed or erased by individual setting after the collective setting described in page 23, causing
setting content discrepancies among the days of the week, collective erase is not allowed.
Confirm mode
1
Press the PROGRAM
and current day of the week flash.
2
Press the " or
Select a day of the week to be canceled.
3
Press the SET button.
The day of the week is determined and the program number flashes.
4
Press the " or
Select a program number to be canceled.
At cancelation operation, do not press the SET button. If the SET button is
pressed, the mode is shifted to the Set mode.
5
Press the CANCEL button.
The setting contents of the ON or OFF TIMER are canceled and
displayed on the time display section.
6
Point the remote control towards the remote control
signal receiver of the indoor unit.
Press the PROGRAM
When the PROGRAM button is pressed, the setting is sent to the air-conditioner.
When the setting is received, a buzzer sound (pip, pip, pip) is emitted.
The setting contents of each program are canceled. Perform the operation
indicated above for each program to be canceled.
The WEEKLY TIMER setting contents can be confirmed.
1
Press the PROGRAM
flashes and the setting content lights.
2
Press the " or
Select a day of the week and a program number to be confirmed.
Display starts from the current day of the week. For the program without
setting, is displayed. When the PROGRAM button is pressed in
Confirm mode, a setting mode is set.
Mon
Tue
Sun
Display of all of the
days of the week
How to cancel
The Confirm mode can be terminated by pressing the ON/OFF, CANCEL or
SET button.
NOTICE
 If no operation is performed for 60 seconds in Confirm mode, the Confirm
mode is terminated.
EN-24
button.
(TIMER)" button.
(TIMER)" button.
button.
button for 3 seconds or more.
(TIMER)" button.
P1 P2 P3
P1 P2 P3
P1 P2 P3
P1 P2 P3
is
P4
P4
P4
P4