Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
Operation
Control panel
1
8°C indicator
2
6°C indicator
3
4°C indicator
4
2°C indicator
A
Temperature setting button
Note: Do not use sharp objects to operate the control
panel. They can scratch or damage the control panel.
Switching on
When you connect the mains plug to a power socket,
the appliance switches on and starts operating.
Display
In case of a temperature sensor failure, the
corresponding indicators will blink.
Indicator status
The 2°C and 6°C
indicators (
4
and
2
) are
blinking.
The 4°C and 8°C
indicators (
3
and
1
) are
blinking.
The 2°C, 6°C and 8°C
indicators (
4
,
2
and
are blinking.
Note: If there is a flashing failure, please call the
service center.
Setting the temperature
Recommended temperature
Refrigerator compartment: +6°C (factory setting)
• You can set the temperature of the refrigerator
compartment via the control panel.
• You cannot directly set the temperature of
the freezer compartment. But the colder the
refrigerator compartment, the colder the freezer
compartment.
• This appliance does not have a memory function.
After you plug it in, it always sets the temperature
to 6°C.
1
2
3
4
A
Fault
Refrigerator temperature
sensor failure
Ambient temperature
sensor failure
Refrigerator defrosting
1
)
temperature sensor
failure
To download the full version visit www.ikea.com
To set the temperature, press the temperature
A
setting button
one or more times until the
indicator for the desired set temperature lights
up. The appliance will operate according to the
new set temperature in 30 seconds.
Tips:
• The lower the set temperature, the longer
you can safely store your food and the more
electricity the appliance consumes.
• The higher the set temperature, the quicker
your stored food decays and the less electricity the
appliance consumes.
Super cooling mode
• To put the appliance
into super cooling
mode, press and
hold the temperature
A
setting button
for
3 seconds. The two
1
upper indicators (
2
and
) light up and
the appliance enters
super cooling mode in
30 seconds.
• The appliance will automatically exit super cooling
mode after 6 hours. To exit this mode earlier, press
the temperature setting button
Super freezing mode
• To put the appliance
into super freezing
mode, press and
hold the temperature
A
setting button
for
6 seconds. The two
3
lower indicators (
4
and
) light up and
the appliance enters
super freezing mode in
30 seconds.
• The appliance will automatically exit super freezing
mode after 40 hours. To exit this mode earlier,
press the temperature setting button
Switching off
To switch off the appliance, disconnect the mains plug
from the power socket.
6
8°C
6°C
4°C
2°C
1
2
A
3s
A
.
3
4
A
6s
A
.
Advertisement
Table of Contents
