Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
Operation
Control panel
A
B
A
Power button
B
Temperature setting button
1
2℃ indicator
2
4℃ indicator
3
6℃ indicator
4
Super cooling mode indicator
Note: Do not use sharp objects to operate the control
panel. They can scratch or damage the control panel.
Switching on
When you connect the mains plug to a power socket,
the appliance switches on and starts operating.
Display
• After you plug in the appliance, it emits a ring
and all indicators light up for 3 seconds. Then all
indicators turn off except the 4°C indicator
the compressor starts running.
• In case of a known failure, the corresponding
indicators will blink.
Indicator status
The 2°C and 4°C
indicators (
1
and
2
)
are blinking.
The 2℃ and super
cooling mode indicators
(
1
and
4
) are blinking.
The 2°C and 6°C
indicators (
1
and
3
)
are blinking.
The 4℃ and super
cooling mode indicators
(
2
and
4
) are blinking.
Note: If there is a flashing failure, please call the
service center.
Setting the temperature
Recommended temperature: +4°C (factory setting)
• You can set the temperature of the refrigerator
compartment via the control panel.
• When the appliance is plugged in for the first time,
it sets the temperature to 4°C. When you plug
in or switch on the appliance again, it sets the
temperature to the last set temperature.
1
2
3
4
2
Fault
Refrigerator temperature
sensor failure
Ambient temperature
sensor failure
Refrigerator defrosting
temperature sensor failure
Communication failure
To download the full version visit www.ikea.com
To set the temperature, press the temperature setting
button
one or more times until the indicator for
B
the desired set temperature lights up. The appliance
will operate according to the new set temperature in
15 seconds.
Note: If power cut in the first 30 min, it will return to
the previous setting.
2°C
4°C
Tips:
• The lower the set temperature, the longer you can
safely store your food and the more electricity the
appliance consumes.
• The higher the set temperature, the quicker your
stored food decays and the less electricity the
appliance consumes.
Super cooling mode
Note: The Super cooling function is specifically
designed to rapidly cool down newly placed food in
the fridge compartment. If you have a significant
amount of warm food, such as after grocery
shopping, it is recommended to activate the Super
and
cooling function. By doing so, you can ensure quick
cooling of the products and reduce the temperature
rise, thereby effectively prolonging the preservation
of all the other food items inside.
• To put the appliance into super cooling mode,
press the temperature setting button
more times until the super cooling mode indicator
lights up. The appliance enters super cooling mode
in 15 seconds.
• The appliance will automatically exit super cooling
mode after 6 hours. To exit this mode earlier, press
the temperature setting button
Door opening alarm
• If the refrigerator door is kept open for more than
120 seconds, the door opening alarm will go off.
• To stop the alarm, close the open door or press
button
.
A
Switching off
• To switch off the appliance, press and hold the
power button
turn off and the appliance stops operating in
15 seconds.
• To switch the appliance back on, press and hold
the power button
resumes its operation.
• To disconnect the appliance from the power
supply, disconnect the mains plug from the power
socket.
6°C
Super cooling mode
.
B
for 10 seconds. All indicators
A
for 10 seconds. The appliance
A
6
one or
B
Advertisement
Table of Contents
