Storing The Blade - Exmark LAZER Z CT Operator And Parts Manual

5.4

STORING THE BLADE

1. Before long-term storage, wash the entire blade assembly with mild detergent and water to
remove dirt and grime.
2. Check the condition of the scraper; refer to Reversing the Scraper, page 11.
3. Grease and oil the blade; refer to Greasing and Lubricating the Blade, page 11.
4. Check and tighten all bolts, nuts, and screws. Repair or replace any part that is damaged.
5. Paint all scratched or bare metal surfaces. Paint is available from our Authorized Exmark
Service Dealer.
6. Store the blade in a clean, dry garage or storage area.
7. Cover the machine to protect it a keep it clean.
- 13 -