Exmark LAZER Z CT Operator And Parts Manual page 13

3. Insert the shaft on the pulley plate assembly into the slot in the blade frame and secure the
assembly to the front of the traction unit with 2 bolts (1/2 x 1-1/4 in.) and locknuts (1/2 in.)
(Fig. 8).
4. Connect the cable clevis to the blade assembly frame with a clevis pin and hairpin cotter
(1-3/16 in.) (Fig. 9).
5. Connect the other end of the cable to the lift shaft with a clevis pin and hairpin cotter (1-
3/16 in.) (Fig. 10).
Figure 8
Figure 9
Figure 10
- 8 -