Adjustment & Setting.21; Dip Switch Setting - Panasonic RAMSA WZ-AD96 Operating Instructions Manual

Chapter 3
Adjustment and Setting
DIP Switch Setting
On the Rear Panel an 8-bit DIP switch is provided. Following pages in this
chapter describe more information on each function. Default settings are
marked with *.
fg—I w
Switch # 7 and 8 select the reference level. nB ©
ra i in
SW# Reference Level (in dBFS) £
-20 -18 -16 -14 SB "
-20
-18 -16 -14
8 Off* Off On On
7 Off* On Off On
Switch # 6 will function if internal setting is changed. See the next chapter.
SW# Wordclock outout Wordclock output
Follows Sampling Follows AES
Frequency Output Rate
Off* On
Switch # 5 through 3 select the peak detection
level from among 8 options.
SW# Peak Detection Level (in dBFS)
-6.0 -5.0 -4.0 -3.0
5 Off* Off
Off Off
4 Off*
Off
On
On
3
Off* On
Off
On
SW#
Peak Detection Level (in dBFS)
-2.0
-1.0
-0.5
0.0
5 On On On On
4
Off Off On On
3
Off On
Off On
Reference Level
™
-14dBFS
E -2MBFS_
' WCK OUT Seleci
rq Follows DIGITAL Oufpul
5
Follows FREQ Seleci
Peak Detection Level
m
bd
□3
O.OdBFS
CB
-3.0dBFS
S -I.OdBFS
E -2.0dBFS £ -6.0dBFS
, tn_E_
Future Use_
AES/EBU 96kHz Tx Mode
P
3
Dual AES/EBU_
an" Hi-Speed AES/EBU
Switch # 2 does not function.
Switch # 1 selects the AES/EBU mode for 96 kHz operations.
SW# AES/EBU Tx Mode Selection
Hi-Speed Single Wire Dual mode
Off* On 1