Panasonic RAMSA WZ-AD96 Operating Instructions Manual page 17

Getting Started
© DIP Switch[l 2345678 ON OFF]
An 8-bit DIP switch is provided for settings . See page 21 for the
setting.
m~~i
m~~i r-
rm <o
rn i m
ip i
■'t
rn i cn
rn i cm
cnzi -
(Ql ADAT Output [ADAT OUT] 0FF
This optical connector supplies digital outputs for ADAT _
fo
0 Wordclock Input Connector [WORD CLOCK IN]
This BNC accepts the wordclock supplied by an external device. To
synchronize the internal clock to the wordclock in, select EXT by
the CLOCK button, then select a frequency" by the FREQ button.
0 Wordclock Output Connector [WORD CLOCK THRU]
This BNC supplies the wordclock looped through the WORD
CLOCK IN.
RU
'"WORD CLOCK1'
© Digital Output Connector [AES1 AES2 AES3 AES4 AES/EBU DIGITAL
OUTPUT]
These XLR connectors supply AES/EBU digital outputs. Output channels for
Dual AES mode are selected from a set of 1, 2, 3 and 4, or 5, 6, 7 and 8 by
the FREQ/CH SEL button in the shift mode operation.
@ Grounding Terminal [SIGNAL GND]
Connect with other devices' GND to level the mutual ground potential if
required.
0 AC Inlet [AC IN]
Connect the supplied power code.
v_
)
AC IN
18