Gigabyte G293-S45-IAP1 User Manual page 80

Parameter
Memory RAS Configuration
(continued)
(Note) Advanced items prompt when this item is defined.
Description
Sparing SW Error Match Threshold
Š
– Correctable Error Threshold (1-32767) used for bank level
information.
– Press the <+> / <-> keys to increase or decrease the desired
values.
Correctable Error Time Window
Š
– Correctable Error time window based interface in hour (0-24).
– Press the <+> / <-> keys to increase or decrease the desired
values.
Leaky bucket time window based interface
Š
– Enable/Disable leaky bucket time window based interface.
– Options available: Disabled, Enabled. Default setting is
Disabled.
Leaky bucket low bit
Š
– Configures leaky bucket low bit (1-63).
– Press the <+> / <-> keys to increase or decrease the desired
values.
Leaky bucket high bit
Š
– Configures leaky bucket high bit (1-63).
– Press the <+> / <-> keys to increase or decrease the desired
values.
ADDDC Sparing
(Note)
Š
– Enable/Disable ADDDC Sparing.
– Options available: Disabled, Enabled. Default setting is
Disabled.
Enable ADDDC Error Injection
Š
– Options available: Disabled, Enabled. Default setting is
Enabled.
Column Correction Disable
Š
– Options available: Disable, Enable. Default setting is Disable.
Set PMem Die Sparing
Š
– Options available: Disabled, Enabled. Default setting is
Disabled.
Patrol Scrub
Š
– Options available: Disabled, Enabled, Enable at End of POST.
Default setting is Disabled.
BIOS Setup
- 80 -