Motorola V200 Service Manual page 60

Troubleshooting
56
Receiver Sensitivity (FER)
Table 19. Receiver Sensitivity (FER) Test Values
Parameter
LOW_CHANNEL
MID_CHANNEL
HIGH_CHANNEL
13K_DATA_TRAF_LEVEL
RX_LEVEL
FER_LIMIT
• Phone should be powered on and in a 13K/RateSet1 CDMA Full Rate Data
Call.
• Depending on which Data Rate, set the Traffic Level accordingly to either
13KDATA_TRAF_LEVEL.
• See Figure 23, Screen 1.
• When the call is established, reduce the RF amplitude to RX_LEVEL.
• See Figure 23, Screen 2.
• Measure FER over a maximum of 10000 frames to a confidence level of 95%.
• The Frame Error Rate (FER) may not exceed FER_LIMIT as specified in
Table 19.
October 04, 2001
CDMA V200
CDMA PCS
1013 25
350 650
735 1175
-12.3 dB -12.3 dB
-104 dBm -104 dBm
(-102 dBm @ (-102 dBm @
HOT thermal) HOT thermal)
0.5% FER 0.5% FER
6881039B10